• We've moved. Our community is now at ownd.sh — latest discussions and updates live there.

STRAIGHT METHOD FOR SIM CLONING

ongoogles

Royal
Royal
ongoogles Rep
0
0
Rep
12
ongoogles Vouches
0
0
0
Vouches
0
Posts
157
Likes
620
Bits
3 YEARS
3 YEARS OF SERVICE
Hidden Content

HOW TO CLONE A SIM CARD

Things You’ll Need:

Blank Programmable SIM Card: I got mine from Amazon, but you can also find one on eBay.

A SIM Firmware Reader/Writer: I purchased this on Amazon too, and it’s available on eBay. (If you’re in India, you can get it from an authorized store.)

Download and install: MagicSIM

Download and install: USB SIM Card Reader

You’ll need access to the target SIM for about 15 to 20 minutes.

Let’s dive into cloning the SIM card.

Step 1: Take the SIM out of the phone and insert it into the card reader. Open MagicSIM and click on "read from card." When it shows ‘connected,’ choose "crack SIM" from the toolbar.

Step 2: Click on "strong KI," select all the other find options, and then hit "start." Once your KI is located and the cracking process is done, go to the file menu, select "save as," and save your cracked SIM information.

Step 3: Make sure to click "disconnect" from the file menu; otherwise, you could damage your SIM card. [This step is crucial to avoid ruining the SIM.]

Step 4: After it says disconnected, take out the SIM. Insert it back into your phone to check if it still works. It should! (If it doesn’t, you might not have unlocked it properly, or you may have copied instead of cracked and saved it.)

Unlocking the SIM Card

Go to phone tools, select SIM card, and then choose unlock SIM. It will ask for a code. Contact your network provider; they’ll need your phone number, account details, name, and security code. When they ask why you need to unlock your SIM, just say it’s to make it compatible with your overseas phone or something similar. Once they provide the unlock code, enter it, and it should say SIM unlocked.

Step 5: Insert the blank SIM card and open the USB SIM Card Reader Software, not MagicSIM this time.

Step 6: Click "connect." If it’s truly blank, it should display ‘No Info Found.’

Step 7: Choose "write to SIM," and it will prompt you to select a .dat file. Pick the one you saved earlier.

Step 8: Now click "start." It will take about 10 minutes to write the data. Once it’s done, it will ask for a security code, so enter that.

https://usb-sim-card-reader.software.informer.com/3.0/

https://download.cnet.com/MagicSIM/3000-...01728.html

If you enjoyed this tutorial, click like
wack.png


 

Attachments

  • wack.png
    wack.png
    932 bytes · Views: 0
ongoogles's signature

william9002

Well-known member
william9002 Rep
0
0
Rep
0
william9002 Vouches
0
0
0
Vouches
0
Posts
234
Likes
2
Bits
3 YEARS
3 YEARS OF SERVICE

nfko83

Honorary Member
Rep
0
0
0
Rep
0
Vouches
0
0
0
Vouches
0
Posts
330
Likes
8
Bits
4 YEARS
4 YEARS OF SERVICE

slaex515

Active member
slaex515 Rep
0
0
Rep
0
slaex515 Vouches
0
0
0
Vouches
0
Posts
97
Likes
0
Bits
2 YEARS
2 YEARS OF SERVICE

DarArson694

Active member
Rep
0
0
Rep
0
Vouches
0
0
0
Vouches
0
Posts
85
Likes
0
Bits
2 YEARS
2 YEARS OF SERVICE

179,162

126,023

1,405,739

Top