Maosesuze
Royal
Royal
honestly bro if the shop is supplying all the parts and doing the work, expect a quote somewhere around 3.2k to 4.5k euros total.(27 September, 2026 - 08:57 PM)Zestras Wrote: Show More
(27 September, 2026 - 08:48 PM)Maosesuze Wrote: Show More
(27 September, 2026 - 08:42 PM)Zestras Wrote: Show MoreIm also wondering if i should get an obd adapter to fix the exhaust flaps. The car sounds amazing the first 2-3 mins before the valves close, however im worried the car got the bench lock and needs to be unlocked, in that case imma need to buy an unlocker to which is a headache, rather take it to a shop and do everything at once
Also wondering if removing the mid resonators passes inspection? or if im fine.
Like you said, im not that intrested in bulding a 500HP+ monster that gaps anything, im just looking for better sound honestly without putting 8k in mods![]()
You definitely don't need a bench unlock just to control the exhaust valves. The DME lock on the 2020+ models only stops you from actually flashing the ECU (like bootmod3 or MHD). BimmerLink just sends a standard CAN command to the exhaust flap actuator to hold it open. A basic OBD adapter does that right out of the box, zero unlocking required.
As for the mid resonators, you're fine for inspections. Cutting them out doesn't touch your emissions at all. You'll pass the sniffer and OBD plug in tests every time since the main cat and OPF are still doing all the actual work. The only risk is a strict visual check if an inspector gets under the car and flags the straight pipes, but most shops won't care as long as the OPF is bolted up and the car isn't obnoxiously loud.
Save the 8 grand. For like $200 total between an OBD adapter and a local muffler shop doing the welds, you get exactly what yur looking for.
Im actually driving down to a tune shop this week to ask for some prices, im very intrested in the 200-cell catted downpipe as well as cutting the mid resonators, im guessing they'll also want to tune the gearbox with xHP and slap a stage 2 tune
All in all what price would you expect they'd quote me with the parts+work?
the biggest headache is gonna be your exact build date. if your car was built after june 2020, the ecu is hard locked by bosch and the shop literally has to pull it out and mail it to femto in finland to get it unlocked before they can do anything. if its an early 2020 build they can just bench unlock it locally in like 20 mins.
most of your budget is going straight to that catted downpipe. the good ones with hjs cats that actually pass eu emissions without throwing dash codes are expensive as hell, like 1.6k to over 2k just for the part. install is maybe another 300.
the mid resonator delete should be super cheap, like 200 tops since its just chopping it and welding some straight pipe.
for xhp, the license and map pack alone cost about 450, so expect around 500 total for them to flash it. the stage 2 tune and unlock is gonna be another 800 to 1500 depending on if it needs that trip to finland.
just make sure they don't finesse you on labor for the res delete or the xhp flash since those take basically no time at all.
Attachments
Maosesuze's signature
